无人机视角下的林木爆燃火特性研究

森林火灾“爆燃”现象的特征是突然发生的高强度、高蔓延速度的燃烧。目前为止，关于“爆燃火”的原因还没有达成共识。以无人机视角下对林木爆燃火特性研究，以四川木里特大森林火灾为研究对象，通过分析凉山州某森林扑火部队3月31日木里森林火灾当天KWT（科卫泰）无人机航拍火场画面，结合无人机实时影像及实地调研数据，分析了峡谷地形林火蔓延时空特征，探讨了峡谷中风向风速变化时空分布规律，研究了地形变化条件下，不同海拔高度风速特征，建立了无人机倾角测量风速模型（其中为风速m·s-1，为无人机倾角°）。结果表明，高山峻岭特殊地形环境下每天4:00—12:00时间段为静风期，为峡谷林火扑救最佳时期；午后15:00—17:00和晚上20:00—22:00为山谷地形风速活跃期；仿真软件数据显示山顶、谷底与山腰不同海拔位置的风速风向不统一，谷底会产生乱流现象，且风速与海拔不存在正相关关系，小气候在复杂地形中占主导影响地位；在谷口至山谷深处的中间位置会出现气流速度的波峰状态，并易形成乱流，为爆燃火发生提供了客观必要条件。该研究可为复杂地形环境下，森林草原火灾扑救安全提供数据和技术支撑。     

Free control of far-field scattering angle of transmission terahertz wave using multilayer split-ring resonators’ metasurfaces

To enhance transmission efficiency of Pancharatnam–Berry (PB) phase metasurfaces, multilayer splitring resonators were proposed to develop encoding sequences. As per the generalized Snell’s law, the deflection angle of the PB phase encoding metasurfaces depends on the metasurface period’s size. Therefore, it is impossible to design an infinitesimal metasurface unit; consequently, the continuous transmission scattering angle cannot be obtained. In digital signal processing, this study introduces the Fourier convolution principle on encoding metasurface sequences to freely control the transmitted scattering angles. Both addition and subtraction operations between two different encoding sequences were then performed to achieve the continuous variation of the scattering angle. Furthermore, we established that the Fourier convolution principle can be applied to the checkerboard coded metasurfaces.     

A Robust Metal-Organic Framework with Scalable Synthesis and Optimal Adsorption and Desorption for Energy-Efficient Ethylene Purification

Adsorptive separation is an energy-efficient alternative, but its advancement has been hindered by the challenge of industrially potential adsorbents development. Herein, a novel ultra-microporous metal-organic framework ZU-901 is designed that satisfies the basic criteria raised by ethylene/ethane (C₂H₄/C₂H₆) pressure swing adsorption (PSA). ZU-901 exhibits an “S” shaped C₂H₄ curve with high sorbent selection parameter (65) and could be mildly regenerated. Through green aqueous-phase synthesis, ZU-901 is easily scalable with 99 % yield, and it is stable in water, acid, basic solutions and cycling breakthrough experiments. Polymer-grade C₂H₄ (99.51 %) could be obtained via a simulating two-bed PSA process, and the corresponding energy consumption is only 1/10 of that of simulating cryogenic distillation. Our work has demonstrated the great potential of pore engineering in designing porous materials with desired adsorption and desorption behavior to implement an efficient PSA process.     

高压下受限齿轮油成膜特性研究

本文揭示了在实际应用中极端工况下齿轮油的润滑特性.为了测量在高接触压力和不同温度条件下齿轮油的成膜能力,制作了高精度的膜厚测量仪,采用相对光强法实现纳米级膜厚测量.试验中共采用了5种性质不同的齿轮油,在纯滚动条件下测量接触区的油膜厚度,结果表明：随着接触压力的升高油膜厚度明显降低,但压力对润滑状态影响不大;温度的改变不但能影响油膜厚度,对润滑状态的影响也很明显;GL-5 85W/190和GL-5 85W/90齿轮油在接触压力达3 GPa温度提高到120℃时仍能形成很厚的油膜,但其余3种润滑剂在极端工况下成膜能力不足.本文最后根据试验结果还提出了含有丰富添加剂的齿轮油润滑模型.     

驱动问题引领下的核心反应在生产实际中的应用复习教学——以“铁和硫酸铜溶液的反应”为例

以铁和硫酸铜溶液的反应在“湿法炼铜”生产实际中的应用复习教学为例,针对学生能力的薄弱点,围绕核心反应搜集丰富的素材,引导学生模拟体会具体反应应用于生产实际时需考虑的问题,以问题解决为线索,达到促进学生发展的目的。     

基于发展化学核心素养的概念教学——以“认识溶液”为例

化学概念不仅是基础知识的组成部分,还承载着发展学生思维能力的功能。以初中化学教学“认识溶液”为例,根据学情和教学内容整合了丰富的实验、媒体、社会等素材,从宏观到微观,从证据到推理,从科学精神到社会责任,促进了学生学科思维和意识的协同发展,获得良好的教学效果。     

镧助剂对Ni2P/SBA-15催化剂结构及加氢脱硫性能的影响

以SBA-15为载体,Ni(NO3)2·6H2O为镍源,(NH4)2HPO4为磷源,制备了初始P/Ni比为0.8的Ni,P/SBA-15前驱体,然后添加La助剂,再经过干燥、焙烧和程序升温氧气还原,制备了一系列不同La含量的La-Ni,P/SBA-15催化剂.采用XRD,N2-吸脱附和XPS对催化剂的结构进行了表征,以...     

Effect of ground electrode on charge injection and surface potential of corona charged polyethylene film

The surface potential decay measurement is a simple and low cost tool to assess electrical properties of insulation materials; therefore, understanding the physical mechanisms of the surface potential decay becomes necessary. With our recent space charge measurement results on corona charged samples, bipolar charge injection on corona charged samples had been observed. Based on this new fact, it is anticipated that the ground electrode should have significant effect during corona charging and subsequently decay processes. In the paper, low density polyethylene (LDPE) film with gold ground electrode was compared with LDPE film with aluminium ground to study effect of ground electrode on charge injection and surface potential decay processes. Charging current during the corona charging, surface potential decay and space charge dynamics after corona charging in the samples with either gold coated or aluminium ground electrode were measured. Differences have been observed for gold ground electrode when compared with aluminium ground electrode. Higher work function of gold electrode is responsible for the observed differences. A preliminary simulation has also attempted to show that the bipolar injection may take place in corona charged LDPE films.     

Comparative analysis of CFD models for jetting fluidized beds: Effect of particle-phase viscosity

Under the Eulerian–Eulerian framework of simulating gas–solid two-phase flow, the accuracy of the hydrodynamic prediction is strongly affected by the selection of rheology of the particulate phase, for which a detailed assessment is still absent. Using a jetting fluidized bed as an example, this work investigates the influence of solid rheology on the hydrodynamic behavior by employing different particle-phase viscosity models. Both constant particle-phase viscosity model (CVM) with different viscosity values and a simple two-fluid model without particle-phase viscosity (NVM) are incorporated into the classical two-fluid model and compared with the experimental measurements. Qualitative and quantitative results show that the jet penetration depth, jet frequency and averaged bed pressure drop are not a strong function of the particle-phase viscosity. Compared to CVM, the NVM exhibits better predictions on the jet behaviors, which is more suitable for investigating the hydrodynamics of gas–solid fluidized bed with a central jet.     

Torsional impact response of a penny-shaped crack in a functional graded strip

The torsional impact response of a penny-shaped crack in a nonhomogeneous strip is considered. The shear modulus is assumed to be functionally graded such that the mathematics is tractable. Laplace and Hankel transforms were used to reduce the problem to solving a Fredholm integral equation. The crack tip stress field is obtained by considering the asymptotic behavior of Bessel function. Explicit expressions of both the dynamic stress intensity factor and the energy density factor were derived. And it is shown that, as crack driving force, they are equivalent for the present crack problem. Investigated are the effects of material nonhomogeneity and strip‘s highness on the dynamic fracture behavior.Numerical results reveal that the peak of the dynamic stress intensity factor can be suppressed by increasing the nonhomogeneity parameter of the shear modulus, and that the dynamic behavior varies little with the adjusting of the strip‘ s highness.